Genuine Leather Python Watch Straps
How do I know if a Watch Strap will fit your wrist?
These measurements are the cirucmference size of wrist that this strap will fit when attached to your watch and done up using the provided strap connections. This can be worked our for your wrist by using a sewing tape to measure the cirucmerfence of your wrist just below your wrist bone.
Please note: this measurements are in Milimeteres (mm)
Quick Release Pins Type Connection
A quick release pin is a spring watch pin that springs back into place by depressing the spring pin by using the small nib that sits on the side of the pinThis can be done easily by using your fingernail.
These pins allow for your watch strap to be easily interchanged with other straps or taken off for cleaning or different activites.
You can find replacement Quick Release Pins Connectors on this link.
How to find our what model of Headphones you have?
Typically you can find your Headphones Name or Model/Serial Number in one of these locations below. Alternatively, you may find these on your Phone if the headphones are bluetooth connected or have an app.
Leather Material
Show a level of sophistication with a classic and timeless look of a Leather Watch Band.
Find more Leather watch bands now!
buckle Watch Connection
The Buckle Watch Strap Connection is one of the most common and most secure connection types for watch bands.
What is the Watch Lug Width?
The Lug Width refers to the width of the watch where the watch strap attaches.
The Watch Strap is often the same as the Lug Width but not always, sometimes the strap of the width can vary to where it attaches to the watch (attaches to the Watch Lug)
In this instance, this watch strap will fit a watch with a lug width of 18mm, 20mm, 22mm
What is the Watch Strap Width?
The Watch Strap Width (also know as the Watch Buckle Width), which is the width of the strap at the buckle. While this is often the same as the Lug Width, it is not always the same. For this Watch Band, the Watch Strap Width is 18mm, 20mm, 22mm
What is the Total Watch Strap Length?
The Total Watch Strap Length refers to the total length of the Watch Strap (both pieces pictured above added together, ie Total Watch Strap Length = Short Part + Long Part) when butted together. This excludes the watch itself or where the buckle holes are, rather the total length of the phsyical strap itself.
This does not mean this is the size wrist this will fit.
What is the Watch Length?
The Watch Length (also known as the Case Size or Case Diameter) is the length of the watch itself from watch strap end to watch strap end (also known as Lug to Lug). This can be added to the openable watch size to work out the size strap needed to fit your wrist circumference.
Watch Connection |
Quick Release Pins |
|---|---|
 Material
|
Leather |
 Buckle Type
|
Buckle |
Lug Width |
18mm, 20mm, 22mm |
Strap Width |
18mm, 20mm, 22mm |
Total Strap Length |
190mm |
Watch Face Height |
40mm |
Thickness |
Approx. 3.5mm |
Comes With |
|
Compatible with
|
|
Waterproof?
|
No |
Splashproof?
|
No |
Suitable for Exercising?
|
No |
Suitable for Swimming?
|
No |
Cleaning & Care
|
It's important when cleaning leather to use a softer, gentler soap which doesn't have the harsher chemicals which can dry leather and cause cracking. It's best to use a non-scratch cloth like a jewellers cloth or a microfibre and dab at the Leather Band using a damp cloth. The strap should never get fully wet (and neither should your cloth) to avoid causing Water Damage to the strap. |
Ideal Style for
|
|
The python look, in genuine leather
For when a plain strap won't do. These straps carry a classic python pattern in cream, taupe and deep brown that stands out on any wrist.
It's genuine cowhide leather, just not python. No snakes were harmed in the making of these straps.
Underneath is a smooth genuine leather lining, finished with a polished stainless steel buckle and quick release pins, so swapping it onto your watch takes seconds with no tools.
Because every strap is cut from a different part of the hide, the pattern sits a little differently on each one. Yours won't be identical to the photos – it'll be one of a kind.
- Genuine cowhide leather with python pattern
- Genuine leather lining
- Widths: 18mm, 20mm and 22mm
- Length: 75mm + 115mm (excluding the watch)
- Thickness: 3.5mm
- Polished stainless steel buckle with two keepers
- Quick release pins fitted – suits any watch with a matching lug width
Wearing it in: this is real leather, so it starts out a little stiff and may creak for the first few wears. Give it a few days to a couple of weeks – the warmth of your wrist softens the leather and it moulds to your shape, getting more comfortable the longer you wear it.
Care: wipe with a soft, slightly damp cloth and dry it straight away. Keep it out of the water, away from perfume and heat, and store it so the face isn't pressed against other leather.